ZYP-400KN 自动粉末压片机
| 1、调节丝杠 Regulator leading sc兵腦rew 2、压片模具 Tablet-pressing mould老吃 3、立柱 Standing post 4、摆臂 Oscillating arm 5、压力表 Manometer 6、操作板 Operating panel 7、液压站(右侧门内) Hydraulic station 8、压力表 Manometer 9、点动上行按钮 Inching up-going butto什會n 10、点动下行按钮 Inching down-going button文湖 11、压片保压時间调节 Regulating for pressure-holding t不麗ime of tablet-press 12、电源指示灯 Power light 13、压样启动按钮 Start button of sample-微內press 14、停止按钮 Stop button |
应用范围 The scope of application
该仪器主要应用于X荧光分析仪的样品制样、可用于陶瓷、粉末冶金(醫他jīn)、水泥等行业的产品制样。
The instrument is mainly used in 吧拿X-ray fluorescence anal去為yzer sample preparation, ca城這n be used in ceramics, powder metal睡鐘lurgy, cement and other secto草低rs of the product sample preparation.
整机介绍 Introduction of the Compl對機ete Machine
压样机是X射线荧光光谱仪的配套设备。ZYP-400KN,ZYP-600KN型压少一样机采用内模压样方式,操作方便、效率高、性能稳定可靠。筆村
The sample pressers manufa離紅ctured by our company are the m街樂atching equipment of X-ray Fluor跳笑escence Spectrometry. ZYP-40這子0KN and ZYP-600KN Sample 化業 Pressers are adopted the met要請hods of internal mould samp睡船le-press, with features of師錯 easy operation, high eff科吃iciency and stable and r些影eliable performance制跳.
产品结构特点 Characteristics of the Produc站購ts
● 内模式压样,压头行程100毫米。可用于硼酸、钢环、铝杯、塑环等各类压样方通了式,适用范围广,工作稳定。
Adopted internal mould sam線飛ple-press, pressure head tra樹樹vel is 100 mm. The produc物化ts can be used for v近爸arious kinds of sample-pressing methods線分 such as boric acid, ste制姐el ring, aluminum cup, plasti又在c ring etc., with character子很istics of broad scope of applicatio業件n and stable working.
● 特有的缓加压、慢退模程序更有利于保证压样合格率、提著農高压样样品质量。
With specific programs of離爸 slow pressurization and slow moul腦些d-release, the products are fa得東vorable to ensure acceptance rate of 司中sample-press, improve sample qu們離ality of sample-press.
● 特别设计的集成液压管道模块不仅使组装更門樹加方便,而且减少了漏油机會。
With integrated hydraulic pipe bloc腦紅k being specially designed, it not only笑遠 makes assembling easier, but al校間so reduces the chance of oil leak.
● 加厚的油箱盖板使油泵和电磁阀的动作噪音更小。
With thickening oil-tank cover-bo綠來ard, it makes acting noise of oi去下l pump and solenoid va關動lve smaller.
● 采用由可控硅集成的固态模块替代传统的接触器避免了由我些于电机频繁启动而引起的各类故障,有效提高了吧雜该部分的使用寿命。
Adopted solid-state block of i山音ntegrated silicon controlled to repla湖校ce traditional contacto店懂r, it avoids various民山 kinds of troubles caused by 如現frequent starting of motor and efficie資匠ntly increases service life o紙低f this section.
● 继电器控制部分采用印刷板焊接煙海结构,减少了控制箱的接线,提高了电器控制的可靠性。相文
The Control section of 慢低relay is adopted the wel作頻ding structure of printed circu土放it board, it reduces城視 wiring of control box, imp工亮roves reliability of e老什lectric control.
● 控制电源全部采用低压24V,工作更加安全可視水靠。
Control power source is full拿中y adopted low-voltage of 24森視V, which makes work safer and more reli又務able.
● 结构紧凑,占地面积小。
With compacting structure, small說要 floor space.
技术指标 Indicators
ZYP-400KN | 技术参数 |
压片压力 | 40T(吨) |
模具 | 硼酸、钢环、铝杯和塑料环 |
压头大行程 | 100mm |
压片保压時间 | 0~999 秒 |
供电电源 | 380V/50Hz |
额定功率 | 1100W |
外型尺寸 | 670x510x1180mm |
净重 | 345Kg |