ZYP-600KN 自动粉末压片机

应用范围 The scope of application

该仪器主要应用于X荧光分析仪的样品制样、可用于陶瓷、粉末冶金(和志jīn)、水泥等行业的产品制样。

The instrument is mainly us都明ed in X-ray fluorescence analyzer s一山ample preparation, can be used in c大雪eramics, powder metallur習們gy, cement and other sectors of the pr笑理oduct sample prepara地村tion.

整机介绍 Introduction of the Complete Mac和身hine

压样机是X射线荧光光谱仪的配套设备。ZYP-400KN，ZYP-60這跳0KN型压样机采用内模压样方式，操作方便、效率匠綠高、性能稳定可靠。

The sample pressers ma聽湖nufactured by our company書作 are the matching equipment of X-ray門慢 Fluorescence Spectrometry. ZYP-黃慢400KN and ZYP-600KN Samp鐵通le Pressers are ado和花pted the methods of internal mo務歌uld sample-press, with features of eas白會y operation, high efficiency 來還and stable and reliable perform樹路ance.

产品结构特点 Characteristics of the Products
● 内模式压样，压头行程100毫米。可用于硼酸、钢环、铝杯、塑环等書話各类压样方式，适用范围广，工作稳定。

Adopted internal mould sa火弟mple-press, pressure 器民head travel is 100 mm. The products ca志都n be used for various kinds of sam河文ple-pressing methods林腦 such as boric acid,他好 steel ring, aluminum c她子up, plastic ring etc., with charac和文teristics of broad scope 謝吧of application and stable working.
● 特有的缓加压、慢退模程序更有利于保证压样合讀民格率、提高压样样品质量。

With specific programs of slow輛去 pressurization and 火信slow mould-release, the pr腦吧oducts are favorable to ensure ac看刀ceptance rate of sam是他ple-press, improve sample quality of s物日ample-press.
● 特别设计的集成液压管道模块不仅使组装更加方便，而且减少了漏油机會訊森。

With integrated hydraulic pip廠科e block being specially designed, it我門 not only makes asse都做mbling easier, but also哥技 reduces the chance of oil le醫農ak.
● 加厚的油箱盖板使油泵和电磁阀的动作噪音更山黃小。

With thickening oil-tank co訊讀ver-board, it makes acti但低ng noise of oil pump and solenoid valve家個 smaller.
● 采用由可控硅集成的固态模块替代传统的接触器避免了由個信于电机频繁启动而引起的各类故障，有效提高了该地章部分的使用寿命。

Adopted solid-state block 有草of integrated silicon controlled to re費科place traditional contactor, it a習見voids various kinds of troubles caus東購ed by frequent star我路ting of motor and efficiently月雜 increases service life of 友身 this section.
● 继电器控制部分采用印刷板焊接结构，减少了控美日制箱的接线，提高了电器控制的可靠性媽開。

The Control section of relay 市問is adopted the welding stru數關cture of printed circuit和人 board, it reduces wiring of co綠一ntrol box, improves 物中reliability of electr大個ic control.
● 控制电源全部采用低压24V，睡遠工作更加安全可靠。

Control power source is fully 草會adopted low-voltage of 24V, w黑錢hich makes work safer and mor好在e reliable.
● 结构紧凑，占地面积小。

With compacting structu腦空re, small floor space.

技术指标 Indicators